The USB Smargo Smartcard Reader Plus is kind of a Smart TV card reader, which can work for dreambox and most linux based satellite reciever for card sharing. it can read customer’s identity and authorization information and helps you to watch pay satellite TV. It’s a USB smartcard reader / programmer based on a powerful ARM core processor.Here’s a tutorial to How to use Smargo cardreader with CCcam on linux receivers and PCs
DM7020 CCcam.cfg
SERIAL READER : /dev/usb/tts/0 smartreader+
SERIAL READER : /dev/usb/tts/1 smartreader+
SERIAL READER : /dev/usb/tts/2 smartreader+
SERIAL READER : /dev/usb/tts/3 smartreader+
DM800 CCcam.cfg
on USB0
SMARTCARD CLOCK FREQUENCY: /dev/usb/tts/0
SMARTCARD CLOCK FREQUENCY: /dev/usb/tts/0
SMARTCARD CLOCK FREQUENCY: /dev/usb/tts/0
SMARTCARD CLOCK FREQUENCY: /dev/usb/tts/0
on USB1
SMARTCARD CLOCK FREQUENCY: /dev/usb/tts/1
SMARTCARD CLOCK FREQUENCY: /dev/usb/tts/1
SMARTCARD CLOCK FREQUENCY: /dev/usb/tts/1
SMARTCARD CLOCK FREQUENCY: /dev/usb/tts/1
PC server CCcam.cfg
SERIAL READER : /dev/ttyUSB0 smartreader+
SERIAL READER : /dev/ttyUSB1 smartreader+
SERIAL READER : /dev/ttyUSB2 smartreader+
Your Adsense Code
SERIAL READER : /dev/ttyUSB3 smartreader+
Now we need add to CCcam.cfg new line:
SERIAL READER : /dev/ttyUSB0 smartreader+
SERIAL READER : /dev/ttyUSB1 smartreader+
SERIAL READER : /dev/ttyUSB2 smartreader+
or whatever USB port your smartreader is entered.
Save CCcam.cfg and run ./CCcam.x86 -d you should see new card is added and running.
In CCcam.cfg is card overklocking and there you just edit like so:
SMARTCARD CLOCK FREQUENCY: /dev/ttyUSB0 4800000 and card works with 4.80mhz set by smartreader+.
READER VALUES – MHZ
3 – 16MHZ
4 – 12MHZ
5 – 9.61MHZ
6 – 8MHZ
7 – 6.86MHZ
8 – 6MHZ
9 – 5.34MHZ
10 – 4.80MHZ
11 – 4.36MHZ
12 – 4MHZ
13 – 3.69MHZ
14 – 3.43MHZ
15 – 3.20MHZ
On this way you can set the correct values for each reader.When you use multiple readers don’t forget the option to set the correct reader! The users can selecte any freqency. The Smart card reader+ will selected the nearest available.
Default smartreader+ speed is with new v1.3 & v1.4 firmware 3.69MHZ and most cards works with that speed. Although new version 1.5 firmware of USB smargo card reader, It is not the official release and not as stable as 1.3 & 1.4. The users would better choose the old version.
Ready to Buy?
Related Articles:
1.Knowledge about Smart card and Smart card Reader
